Research peptides held in Australian stock, every lot tested by HPLC and mass spectrometry. For laboratory research use only.
Cart 0

Peptide Kits and Bundles

Buy GHK-Cu Starter Kit Australia: GHK-Cu 50mg Research Kit With Bacteriostatic Water and Syringe

$59 AUD, GST included

Size

In stock, ready to ship from Australia

Sold to buyers aged 18 and over only.

  • Certificate of analysis for every lot
  • Identity and purity testing
  • Research use only

Buy the GHK-Cu Starter Kit at AminoLab and the whole first step of a copper peptide study comes in one box. Each GHK-Cu Starter Kit Australia order holds a 50 mg vial of GHK-Cu, a small vial of bacteriostatic water containing 3 mL, and a single U-100 syringe sized at one millilitre, all posted from stock we keep in Australia. The peptide is three amino acids, glycine, histidine and lysine, wrapped around a copper ion. Researchers first found it in blood plasma in the early 1970s, and the copper is what makes the powder blue. Its formula is C14H22CuN6O4, its weight is 401.9 and its registry number is 89030-95-5, and you can compare all three with the batch report before paying. To see what concentration your water will give, try the GHK-Cu calculator. Studies that need KPV and BPC-157 as well are better served by the Radiance Bundle. Store the peptide vial frozen and dark until you begin. Browse the wider skin and hair peptides range for more, then order your kit today for lab research by adult buyers.

For laboratory research use only. Not for human or veterinary use. Not TGA approved. See our research use policy.

GHK-Cu Starter Kit Australia, What One Order Contains

KitGHK-Cu Starter Kit
Peptide vial50 mg of blue freeze-dried GHK-Cu
Solvent vial3 mL of sterile water preserved with benzyl alcohol at 0.9%
SyringeOne sterile U-100 barrel, 1 mL
Peptide identityGlycyl-histidyl-lysine with copper(II), 401.9, CAS 89030-95-5
Batch testingMass spectrometry and HPLC on every GHK-Cu batch
Where to keep itPeptide cold and dark, solvent and syringe on a shelf
StockReady to ship
Intended useBench research only

Think of this as the complete first order for copper peptide work. Nothing in the carton is a trial size, and the peptide is identical to what we sell on the standalone GHK-Cu page.

Buy the GHK-Cu Starter Kit at AminoLab and Skip the Missing-Parts Problem

A familiar story in new labs goes like this. The peptide arrives on Monday, someone realises there is no suitable water in the store room, the syringes in the drawer are the wrong scale, and the experiment slips a week. The starter kit exists to stop that. You order once and receive the three things that turn dry powder into a usable solution, each chosen to suit the others.

Item one, the peptide

The vial carries 50 mg of GHK-Cu. Because it was freeze-dried, it sits as a light, airy cake that dissolves almost instantly and stays stable while dry. If you want the full background, including how the peptide was discovered and the matrix studies it is known for, the single GHK-Cu product page covers that.

Item two, preserved water

The solvent is sterile water with a little benzyl alcohol added. That additive does not sterilise anything, but it slows bacteria enough that you can return to the same vial over several weeks. Plain sterile water is a single-use product with no such protection, and saline brings salt that not every peptide welcomes. Copper complexes are also sensitive to some buffers and chelating agents, so a simple preserved water is the safest partner for GHK-Cu. Our comparison of preserved and plain sterile water explains the choice in more depth.

Item three, a unit-marked syringe

On a U-100 barrel, one full millilitre reads as 100 units, so each line is a hundredth of a millilitre. The fine needle is permanently attached, which means hardly any liquid is wasted in the hub.

  • Tuberculin syringes look similar but are marked in millilitres.
  • U-40 syringes, common in animal clinics, put 40 units in each millilitre and cannot be read the same way.
  • A unit is always a volume. The amount of peptide it carries depends on how much water you used.

That final point catches people out. Until you know the strength of your solution, a reading on the barrel cannot tell you how many milligrams you have drawn, so note the water volume on the vial straight after mixing. Labs that already stock solvent and syringes can simply order the peptide by itself.

A good habit is to prepare a simple label before you start. Write the date, the batch code, the volume of water you added and the resulting strength in mg per mL. It takes thirty seconds, and it means anyone in the lab can draw an accurate amount weeks later without repeating the calculation or guessing which vial is which.

Order GHK-Cu for Matrix and Wound Model Research

The peptide's story starts in 1973, when Loren Pickart identified it in human plasma and found that it binds copper(II) very strongly. Since then it has become one of the best documented short peptides in tissue biology. Most labs buy it to measure how a copper-loaded tripeptide alters the output of collagen, elastin and glycosaminoglycans in fibroblast culture.

Others order it for rodent wound studies or for gene expression work on how tissue rebuilds itself. In this carton it is supplied as a lab reagent, not a beauty product and not a medicine, together with the solvent and syringe needed to dissolve it as soon as the parcel arrives. Order the kit and your first solution can be ready on delivery day.

Buying a GHK-Cu Starter Kit in Australia, the Rules Item by Item

When the carton is opened you will find three individually sealed parts. There is the blue peptide vial with its flip-off cap and printed batch code, the clear 3 mL solvent vial, and the wrapped syringe, which is used once and then discarded. Nothing has been mixed in advance, so the powder stays dry until your bench work starts.

Different rules for different items

Each part sits under its own set of rules. No GHK-Cu medicine was on the ARTG as of October 2026, and in April 2026 the TGA listed GHK-Cu in a warning about unapproved peptide products, which explains why researchers source it from reagent sellers rather than pharmacies. Preserved water is rarely on chemist shelves, where single-use sterile water is the norm. U-100 syringes, on the other hand, are everyday pharmacy stock and are given free to registered insulin users through the national diabetes scheme, which does not cover research buyers. For more on where syringes come from, read our insulin syringe buying guide.

Bundling the items is about convenience rather than law, since the solvent volume and syringe scale were chosen to suit a 50 mg vial. Buy the GHK-Cu Starter Kit at AminoLab and it ships from Australian stock as research equipment for in vitro use, sold to adults, never for use in people or animals. When you only need more peptide later, the 100 mg GHK-Cu vial can be ordered separately.

Shop the GHK-Cu Starter Kit, Strengths That Fit the Carton

The kit comes in one format, built around the peptide vial. Two millilitres of the included water make a solution of 25 mg per mL. Using all three millilitres gives roughly 16.7 mg per mL. Both options leave you inside the single solvent vial.

If your project needs more than one kit, order them together and we will pick the peptide vials from the same batch whenever stock allows, so one certificate covers everything. All buyers confirm their age at checkout.

Buy With the Batch Report Checked, and Use the Colour Test Too

Copper sits in a pocket formed by three nitrogen atoms in the glycine and histidine end of the chain, while lysine at the other end is left free. That arrangement soaks up red light, so authentic GHK-Cu is blue, whether dry or dissolved. A pale white or grey product sold as GHK-Cu suggests the copper never made it in.

A blue colour is reassuring, but testing is what proves identity. The report should list a measured mass matching 401.9 and a purity figure from HPLC for your batch. We file every report in the COA library under the code printed on the vial, so once the box arrives you can confirm the colour first and the certificate second.

Order the Kit Online, Then Prepare and Store It

Copper peptide creams line many shop shelves, yet a freeze-dried research vial with matched solvent is hard to find. AminoLab operates online only and posts across the country from local stock, so a team buying peptides in Adelaide works from the same batches as a lab in Darwin. Pay before the 3pm cut-off on a business day and your carton is packed that afternoon, with typical transit times shown on our delivery information page.

When you are ready to mix, let the peptide vial warm to room temperature and wipe both stoppers with alcohol. Use the syringe to transfer 2 mL of water, which takes two full barrels, letting it trickle down the glass, then roll the vial gently until clear. You now have 25 mg in each millilitre, and the GHK-Cu reconstitution calculator covers any other amount. For a complete walkthrough, see how to reconstitute peptides.

Planning to start in a month or more? Put the closed vial straight into a -20 °C freezer. If you will use it sooner, a fridge at 2 to 8 °C is enough, and in both cases keep it away from light. Store the dissolved peptide in the fridge, preferably split into small tubes, and throw out the solvent vial four weeks after its first puncture.

Shop the GHK-Cu Starter Kit Under Its Other Names

Cosmetic labels call the peptide copper tripeptide-1. Research papers often write Cu-GHK or GHK copper, chemists use glycyl-L-histidyl-L-lysine copper(II), and its international drug name is prezatide copper. Every one of these refers to the complex registered as 89030-95-5.

People also describe the carton as a GHK-Cu kit or a copper peptide starter kit. Whatever it is called, it always holds a blue 50 mg vial, 3 mL of preserved water and one U-100 syringe, and you can buy it at AminoLab as the GHK-Cu Starter Kit.

Buy the Kit, the Radiance Bundle or the GLOW Blend

This kit is the right purchase when GHK-Cu is your only compound. If you plan to test the copper peptide alongside an anti-inflammatory tripeptide and a tissue repair peptide, the Radiance Bundle is the better order, because it includes KPV and BPC-157, 10 mg of each in their own vials, plus 10 mL of water and three syringes.

Labs that want a set ratio of several peptides in one vial can consider the GLOW blend, which mixes GHK-Cu with BPC-157 and TB-500. Read our GLOW vs KLOW comparison to see how premixed vials differ from separate ones. Every product mentioned here is in stock at AminoLab.

GHK-Cu Starter Kit at a Glance Before You Buy

Buy a complete copper peptide kit

Glycine, histidine and lysine holding a copper ion, plus the water and syringe to dissolve it. Ready to ship from AminoLab.

One box to order

Fifty milligrams of peptide, three millilitres of preserved water and a single unit-marked syringe.

Why labs buy it

Fibroblast studies of collagen and elastin, and rodent wound work. Research use only.

Choosing between kits

This box is for GHK-Cu on its own. For KPV and BPC-157 as well, pick the Radiance Bundle.

Keep the peptide cold

Freezer for long waits, fridge for near use, and always out of the light. Dissolved peptide stays in the fridge.

Check blue, then check paper

Confirm the blue colour on arrival, then match the batch code to its published report.

GHK-Cu Starter Kit FAQ

How do I order the GHK-Cu Starter Kit online in Australia?

Place the carton in your basket on this page and pay at checkout. It leaves our Australian warehouse the same afternoon when payment clears before 3pm on a business day. Peptide, solvent and syringe are all in the box, so nothing else is needed to start.

Is there a shop near me that sells a GHK-Cu kit?

No. High street shops carry copper peptide skin creams, which are a different thing entirely, and AminoLab does not run a shopfront. Ordering online is the way to get the research kit, delivered to any state or territory.

Does the GHK-Cu Starter Kit come with a certificate of analysis?

Yes, for the peptide. Every GHK-Cu batch is checked by mass spectrometry and HPLC, and its report appears in the COA library under the code printed on the vial. The water and syringe are sterile items, each marked with a batch number and use-by date.

Should I buy the GHK-Cu kit or the Radiance Bundle?

Stick with the kit when GHK-Cu is your only peptide. Move up to the Radiance Bundle when KPV and BPC-157 are in your plan too, because it supplies all three in their own vials with extra water and syringes, for less than buying them individually.

Why is the peptide in the kit blue?

The copper bound inside GHK absorbs red wavelengths, so what you see is blue. Real GHK-Cu keeps that colour dry and dissolved. A colourless product sold under the same name has probably lost its copper, which is why the batch report is worth checking.

What do laboratories buy the GHK-Cu Starter Kit for?

It gives a lab everything needed to dissolve GHK-Cu for cell and animal studies of collagen, elastin and tissue remodelling. AminoLab sells it only to adults as laboratory material, never as a cosmetic or medicine, and never for use in people or animals.

Shop Related Research Peptides

KLOW

80 mg vial

$139
Certificate of analysisEvery research peptide comes with the certificate for its lot, listed in the COA library.
Tested identity and purityIdentity confirmed by mass spectrometry and purity measured by HPLC on every batch.
Australian stockOrders pack and ship from Australia with tracked Australia Post delivery. See delivery information.
Adults 18+ onlySold for laboratory research use only, under our research use policy.

Research use onlyAminoLab supplies research compounds for laboratory and in-vitro use, not for human or animal consumption. By continuing you confirm you are 18 or older and buying for research.

Leave