Research peptides held in Australian stock, every lot tested by HPLC and mass spectrometry. For laboratory research use only.
Cart 0

Peptide Kits and Bundles

Buy Retatrutide Starter Kit Australia: Retatrutide 10mg, 20mg or 30mg Research Kit With Diluent and Syringe

$134 AUD, GST included

Size

In stock, ready to ship from Australia

Frequently ordered with

Sold to buyers aged 18 and over only.

  • Certificate of analysis for every lot
  • Identity and purity testing
  • Research use only

Buy Retatrutide Starter Kit online from AminoLab, available in Australia as the 10 mg, 20 mg or 30 mg carton. Our Retatrutide Starter Kit Australia carton exists for one reason, so a lab with an empty shelf can go from delivery to a labelled stock solution without placing a second order. You choose the peptide fill, 10 mg, 20 mg or 30 mg, and we box it with a 3 mL vial of bacteriostatic water and a single 1 mL U-100 insulin syringe. The peptide is retatrutide, coded LY3437943 during development. It is 39 residues long, engages three receptors (GIP, GLP-1 and glucagon), and carries a C20 fatty diacid that lets it ride on albumin. Reference data for your notebook reads C221H342N46O68, molar mass 4731.3 g/mol, CAS 2381089-83-2. Before you pay, you can open the certificate for the lot in your carton, showing a mass spectrometry identity check and an HPLC purity result. Work out your concentration with the retatrutide calculator, and if a dual agonist comparison is planned, put tirzepatide in the same cart. Sealed peptide goes in the freezer at -20 °C. Add Retatrutide Starter Kit to your cart now and it ships from our Australian warehouse, sold to adults for in vitro research only. More options sit in our metabolic peptides range.

For laboratory research use only. Not for human or veterinary use. Not TGA approved. See our research use policy.

Retatrutide Starter Kit Australia Data Sheet Before You Buy

ListingRetatrutide Starter Kit
Active peptideRetatrutide (LY3437943), a GIP, GLP-1 and glucagon receptor triple agonist
Residues39 amino acids
Empirical formulaC221H342N46O68
Mass4731.3 g/mol
Registry number2381089-83-2
State on arrivalFreeze-dried peptide sealed in glass, diluent as a clear liquid behind a rubber stopper
Quality checksMass spectrometry identity and HPLC purity on every retatrutide lot, certificate issued per lot
Packed itemsRetatrutide vial (your fill), bacteriostatic water 3 mL with 0.9% benzyl alcohol, one sterile 1 mL U-100 insulin syringe, no swabs supplied
StoragePeptide sealed at -20 °C, dark and dry, reconstituted at 2 to 8 °C, water and syringe kept at room temperature until opened
StockIn stock
UseIn vitro laboratory research only

Is the carton right for you? If your lab has no diluent yet, almost certainly. The contents mirror our individual listings item for item. Order the carton here and AminoLab ships it from Australian stock as one parcel.

Who Should Buy This Carton

We built the kit around a common situation. A group decides to add a triple agonist to its receptor panel, orders the peptide, and then discovers on delivery day that nobody has bought water or syringes. Everything stops until a second parcel arrives. Bundling the three items removes that delay, and it also means the first reconstitution uses a diluent and a measuring tool that we know suit the vial.

If you want the chemistry of the molecule itself, the retatrutide vial page covers it fully. Here we focus on the two supporting items, because choosing them badly is the most common way a first run goes wrong.

Why We Pack Preserved Water

Benzyl alcohol at a low level is the only thing separating bacteriostatic water from plain sterile water, and it changes how the vial can be used. The alcohol does not sterilise. It slows bacteria enough that a stoppered vial can be punctured on several occasions over a few weeks and still be fit to use. Unpreserved sterile water has no such margin, so once opened it is a single-use liquid. Saline would add sodium chloride, an ingredient a peptide stock has no use for. A stock you will go back to many times therefore calls for the preserved option, and we set out the trade-offs in our comparison of bacteriostatic and sterile water.

There is one caveat for cell biologists. After dilution into typical culture media the benzyl alcohol is present only in trace amounts, but some sensitive cell lines still notice it. Run a vehicle control made from the same water. Where a vial will be finished in a day or two, plain sterile water avoids the question.

Getting the Syringe Arithmetic Right

Our syringe is a 1 mL insulin type graduated on the U-100 scale, where 100 units fill 1 mL and one unit is a hundredth of a millilitre, or 10 microlitres. The scale tells you volume. It cannot tell you mass, because the amount of retatrutide in any volume depends on how much water you added. Mix to 5 mg per mL and 20 units carries 1 mg. Mix twice as strong and that identical mark carries 2 mg.

New users often treat the unit marks as if they stood for a set quantity of peptide. They do not. Label the vial with its concentration the minute it is reconstituted, then convert every volume you draw through that figure, and errors of this kind disappear. AminoLab put the kit together so that first order is the only order you need.

A Bench Checklist for the Day Your Order Arrives

  • Check the carton holds all three items and that the peptide label shows a fill matching your order and a lot code.
  • Look up that lot code in the COA library and confirm the measured mass sits at 4731.3 g/mol and the purity meets your threshold.
  • Put the peptide vial in the freezer if you are not mixing today, and keep the water and syringe at room temperature.
  • Decide your target concentration before you open anything, using the calculator, and write it down.
  • Prepare a vehicle control from the same water vial if the stock is going into cell culture.

Where the Retatrutide You Buy Came From

Retatrutide is an Eli Lilly molecule, from the same US company behind tirzepatide, and its structure entered the published literature in the early 2020s. What makes it interesting to a laboratory is that GIP, GLP-1 and glucagon receptor activity are all built into a single chain. That allows a direct question to be asked, what changes when all three signals fire together compared with one or two of them?

Everything in the carton is research material with no link to any medicine, and retatrutide has not been registered as a medicine anywhere in the world. Other bundled cartons can be found under kits and bundles. AminoLab sells it in this kit strictly as a laboratory reagent.

Why Traceability Matters for a Retatrutide Starter Kit Australia Labs Buy

The carton itself is white and green, and the three items inside are wrapped separately. The research compound is only the glass vial of freeze-dried retatrutide, in whichever of the 10, 20 or 30 mg fills you picked. The bacteriostatic water is a standard 3 mL multi-draw diluent preserved with 0.9% benzyl alcohol, and the sterile 1 mL syringe is the same U-100 design that Australian chemists stock, as our overview of insulin syringes in Australia describes.

The peptide is where the regulatory picture sits. Retatrutide was not on the ARTG as of October 2026, so no pharmacy or clinic in Australia can legally supply a kit based on it. The TGA made the risk very concrete on 14 September 2026, when it published lab results for a so-called retatrutide product supplied in an unlabelled vial. Testing found zero retatrutide. What the vial held instead was undeclared semaglutide, at roughly eight times the amount in registered semaglutide products.

What a Mass Check Catches That Purity Alone Misses

A vial without markings offers no trail to follow. Worse, a purity test on its own could not have flagged that product, because a clean semaglutide sample still looks clean. Mass is what gives it away, with semaglutide near 4114 g/mol and retatrutide near 4731 g/mol. That is why every peptide vial in our kits carries a printed lot code backed by a mass spectrometry identity result. All three fills are held in Australian stock for online ordering by adults 18+ for laboratory research, none of it is for human or veterinary use, and the lot certificate archive is open to anyone before checkout.

Order the Fill That Matches Your Study

Water and syringe never change from carton to carton.

  • Made for pilot work. Use 2 mL of the supplied water for 5 mg per mL, with 1 mL of water in reserve.
  • The carton most labs choose, since 2 mL produces exactly 10 mg per mL, which is easy to work with.
  • Best for protocols that are already settled. Adding the full 3 mL also lands at 10 mg per mL, but leaves no water spare, so a second bacteriostatic water vial is worth adding.

Orders are accepted from adults aged 18 and over only. All three cartons are in stock now.

Buy the Kit at AminoLab With the Molecule Checked on Its Certificate

Structurally, retatrutide shares the GIP-like backbone that tirzepatide uses. The positions that DPP-4 would otherwise cleave are shielded by aminoisobutyric acid and alpha-methylated residues, the C-terminal end is amidated, and one lysine is fitted with a linker carrying a C20 fatty diacid. Through that lipid, the peptide binds albumin reversibly, and the half-life given in published reports is close to six days.

On your certificate, the two lines that matter are the measured mass, which should agree with 4731.3 g/mol, and the HPLC purity for that lot. The water and syringe are not analysed, because they are sterile supplies identified by lot and expiry. Search the COA library by the lot number printed on the peptide label to bring up the report. Check that report before you order the carton.

Order the Kit Online, Then Mix It and Keep It Cold

No pharmacy or clinic in Australia sells this kit, since retatrutide remains an investigational compound. AminoLab is an online-only shop without a counter or collection point, and we send cartons from Australian stock to all states and territories. When payment lands before 3pm on a business day, the carton leaves that afternoon, and the delivery information page lists typical transit times.

To mix, allow the peptide vial to warm to room temperature and wipe both stoppers. Draw the water into the supplied syringe, release it gently against the glass rather than onto the cake, and swirl until nothing remains undissolved. For the 20 mg carton, 2 mL of water gives 10 mg per mL, and the retatrutide reconstitution calculator covers every other combination.

Unmixed powder is happiest at -20 °C, protected from light and moisture, although a few days at ambient temperature in the post will not hurt it. Once in solution, move it to 2 to 8 °C and, if possible, divide it into aliquots so you never thaw and refreeze the same portion. The water vial has a 28 day limit from its first puncture.

Shop the Kit Under Its Other Names

Some catalogues call the carton a retatrutide kit or simply a reta kit, and you may see the peptide written as retatrutide, reta or LY3437943. Whatever the label, it is one 39-residue sequence registered under CAS 2381089-83-2.

A short glossary helps with the receptor literature. GLP-1 stands for glucagon-like peptide-1. GIP was first named gastric inhibitory peptide, then renamed glucose-dependent insulinotropic polypeptide without any change to its sequence. GCGR is shorthand for the glucagon receptor. Papers class retatrutide as a triple agonist, or tri-agonist, and tirzepatide as a dual agonist. At AminoLab you can buy it simply as the Retatrutide Starter Kit.

When to Buy the Single Vial Instead

A lab that already has bacteriostatic water and U-100 syringes on hand can save by ordering the standalone retatrutide vial in 10, 20 or 30 mg instead. Choose the carton for a first order, or whenever you want certainty that diluent and syringe arrive with the peptide. If you would rather skip mixing entirely, choose the retatrutide pen.

Planning a receptor comparison? The two molecules are each 39 residues long and each carry a C20 chain, so running them in parallel singles out the glucagon receptor's share of any effect. See the retatrutide vs tirzepatide guide for a side by side view.

Retatrutide Starter Kit at a Glance Before You Buy

Buy Everything for the First Mix

One carton brings together the retatrutide vial, a 39-residue agonist of three receptors (glucagon, GIP and GLP-1), and the water and syringe to reconstitute it.

Fills to Order in the Kit

Choose the 10 mg, 20 mg or 30 mg carton, and each one contains 3 mL of bacteriostatic water plus one syringe.

Research Settings

Labs study retatrutide in cell receptor pharmacology and in rodent metabolic models, alongside single and dual agonists. Strictly for laboratory use.

Bundle or Single Vial

Already stocked with water and syringes? The vial alone costs less.

Cold Chain at the Bench

Sealed peptide lives at -20 °C. Mixed solution goes to 2 to 8 °C, ideally in aliquots, and should never be refrozen.

Lot Certificate Available

Every retatrutide lot is identity checked by mass spectrometry and purity tested by HPLC, with its report in the COA library.

Retatrutide Starter Kit FAQ

What does ordering the kit involve?

Select the 10 mg, 20 mg or 30 mg carton and check out. We hold stock in Australia, and when payment comes through before 3pm on a business day the kit ships that day. Because water and a syringe are already packed, there is nothing else to add for the first mix.

Is there anywhere local that stocks it?

No. Retatrutide is investigational, so it is not sold through pharmacies or clinics, and AminoLab has no shopfront. Orders are placed online and shipped from Australian stock to every state and territory, with all labs receiving the same tested lots.

Which carton should a lab start with?

For a pilot, start with the 10 mg carton. Once a method is settled, the 20 mg carton is the usual choice, because 2 mL of the supplied water gives a clean 10 mg per mL. The 30 mg carton offers the lowest cost per milligram for steady, ongoing work.

Can I see test results before buying?

Yes, for the peptide. Each retatrutide lot has a certificate showing a mass spectrometry match to 4731.3 g/mol and an HPLC purity result, filed in the COA library under the vial's lot number. The water and syringe are sterile supplies marked with lot and expiry rather than analysed items.

How does this compare with buying tirzepatide?

Retatrutide adds glucagon receptor activity to GIP and GLP-1, while tirzepatide covers only the dual pair. Both are 39-residue peptides carrying a C20 fatty chain, so testing them side by side is a clean way to see what the glucagon pathway contributes.

What is the kit intended for?

In vitro receptor studies. It supplies retatrutide plus the bacteriostatic water and U-100 syringe needed to reconstitute it. AminoLab sells it purely as research material to adults 18+. Retatrutide is not a registered medicine and the kit is not for human or veterinary use.

Shop Related Research Peptides

Certificate of analysisEvery research peptide comes with the certificate for its lot, listed in the COA library.
Tested identity and purityIdentity confirmed by mass spectrometry and purity measured by HPLC on every batch.
Australian stockOrders pack and ship from Australia with tracked Australia Post delivery. See delivery information.
Adults 18+ onlySold for laboratory research use only, under our research use policy.

Research use onlyAminoLab supplies research compounds for laboratory and in-vitro use, not for human or animal consumption. By continuing you confirm you are 18 or older and buying for research.

Leave