Research peptides held in Australian stock, every lot tested by HPLC and mass spectrometry. For laboratory research use only.
Cart 0

Peptide Nasal Spray Australia: Ready to Use Semax, Selank and DSIP Sprays

Semax

10 mg vial, Nasal spray, 10 mL

From $59

Selank

10 mg vial, Nasal spray, 10 mL

From $59

DSIP

5 mg vial, 10 mg vial, Nasal spray, 10 mL

From $39

BPC-157

10 mg vial, 60 capsules

From $69

Shop All Research Peptides

Our peptide nasal spray Australia range is short and deliberate. Five compounds, Selank, Semax, DSIP, Melanotan II and PT-141, each come pre-dissolved, 10 mg to a 10 mL bottle, so nothing has to be reconstituted before the bottle reaches your bench. Stock is held in Australia, every bottle carries a lot code tied to its own certificate, and ordering takes a few minutes from choosing the compound to checkout.

Shop the Five Peptide Nasal Sprays for Sale

Every bottle is made to the same specification, which means the only real decision is which compound your study needs.

CompoundVial versionFill and strength
Semax nasal spray10 mg vial1 mg per mL, 10 mg in 10 mL
Selank nasal spray10 mg vial1 mg per mL, 10 mg in 10 mL
DSIP nasal spray5 mg and 10 mg vials1 mg per mL, 10 mg in 10 mL
PT-141 nasal spray10 mg vial1 mg per mL, 10 mg in 10 mL
Melanotan II nasal spray10 mg vial1 mg per mL, 10 mg in 10 mL

Picking the Best Peptide Nasal Spray for a Given Study

Asking for the best peptide nasal spray only makes sense once the model is known, because these bottles split across three fields. Cognition and stress work leans on Semax and Selank, the best nasal spray peptides for that area since the intranasal route is where both have the most published data. Sleep projects go to DSIP. Melanocortin receptor experiments go to PT-141 or Melanotan II. When a protocol puts Selank, Semax and DSIP side by side through the same route, the Spray Research Kit costs less than buying the three bottles one at a time.

Order Semax Nasal Spray and Selank Nasal Spray Together

Semax is built from seven amino acids, modelled on the ACTH 4 to 10 fragment and capped with a Pro-Gly-Pro tail that makes it more stable. In Russia it is registered as a medicine in the form of intranasal drops, which is why the spray is the format most researchers associate with it, far more than the vial. It holds no TGA approval.

Selank also comes out of Russian research and carries the same Pro-Gly-Pro extension, but it is modelled on tuftsin, a fragment of immunoglobulin G. Because the two are so often run in parallel, a lab that buys one spray usually ends up with both in the cart.

Buy PT-141 or Melanotan II as a Spray

These two are melanocortin receptor agonists, and both ship in the identical 10 mL format. PT-141 is the research code for bremelanotide, a compound derived from Melanotan II, and research on it centres on the MC3 and MC4 receptors within the central nervous system. Melanotan II is less selective, reaching more of the melanocortin family, the MC1 receptor used in pigmentation research among them. For the structural differences between the analogues, read our Melanotan 1 vs 2 guide.

Both appear under our melanocortin research peptides category.

Spray or Vial, Which Should Your Lab Order?

Lyophilised vialSpray bottle
Physical stateFreeze-dried powderPeptide in solution, ready to use
Work before useReconstitute with bacteriostatic waterNone
StrengthSet by the volume of diluent you addFixed at 1 mg per mL
Where to keep itFreezer for months, fridge after it is mixed2 to 8 °C, protect from light
How long it lastsLongest while the cake stays dryShorter than powder, follow the label expiry

Our advice. Choose a spray when, and only when, the intranasal route is part of your design. Otherwise a vial gives better value, since it keeps longer and you decide the concentration. For mixing a vial, see our guide on how to reconstitute peptides.

Peptide Nasal Spray Australia Testing, Lot by Lot

No spray batch is released until an independent laboratory has checked the peptide's mass and run HPLC to measure purity. The code on your bottle pulls up that exact report on the COA lookup page. Read more about how we test, or visit the lab tested peptides page to see how a certificate for a liquid product reads. If you prefer another no-mix format, browse the pre-filled peptide pens and peptide capsules, and the whole catalogue sits on the peptides for sale in Australia page.

No Local Shop Needed for a Peptide Nasal Spray Near Me

The pharmacies that come up for a peptide nasal spray near me sell decongestants, never research sprays like DSIP or Semax. A shopfront is not required anyway. AminoLab holds all five bottles in Australian stock and sends online orders to labs in every state, each with the same lot certificates.

Labs ordering a spray often add one of these.

  • DSIP spray or vial, which covers sleep research and is the only spray compound that also comes in 5 mg and 10 mg vials.
  • Spray Research Kit, the cheaper route when Selank, Semax and DSIP are compared through the same route, because the carton costs less than three single bottles.
  • BPC-157, never made as a spray, yet often added as a 10 mg vial or capsules to cover a separate arm of the same study.

We sell every spray to adults 18+ purely as a laboratory reagent. None is for people or animals, none holds TGA approval, and we do not give dosing advice. Shop the full peptide range or pick your spray from the table at the top of the page.

Peptide Nasal Spray Australia Explained

What You Get in Each Peptide Nasal Spray Australia Bottle

The bottle is 10 mL, finished with a white pump and a silver collar, and inside is 1 mg per mL of peptide, 10 mg in total. Five compounds are made this way, namely Selank, Semax, DSIP, Melanotan II and PT-141. The label shows the compound, strength, lot code and expiry date, and the bottle needs no mixing before it goes into lab use.

Pump Volume Compared With a Syringe Reading

Working from a vial, you read the volume off the syringe barrel. A spray pump instead delivers a fixed amount per press, determined by its design, so labs that need precision normally calibrate the pump first by weighing a run of actuations. With the strength locked at 1 mg per mL, the maths stays straightforward.

Why Researchers Study the Intranasal Route

In rodent work, intranasal delivery is examined as a way for small peptides to travel to the brain by way of the olfactory region, bypassing the bloodstream. Semax has the longest track record by this route, being registered in Russia as intranasal drops, and Selank followed suit. That shared history is why these sprays sit in our nootropic peptides range.

Solutions Age Faster Than Freeze-Dried Powder

Once dissolved, a peptide undergoes slow chemical change that a dry cake largely escapes. Keep each spray bottle refrigerated between 2 and 8 °C, in its carton and away from light, and should be used before its printed expiry. For stock that must last months, the matching vial kept dry at minus 20 °C is the better choice.

The Spray Research Kit, Three Bottles in One Carton

When one route is used to compare several compounds, the Spray Research Kit brings DSIP, Selank and Semax together, each as 10 mg in 10 mL. Lot codes stay separate per bottle, which means three certificates to check, not one shared report.

Checking a Spray Before It Goes on the Bench

The liquid should be clear and colourless with no particles in it. After that, look up the bottle's lot code in the COA library. Its certificate should name the same compound as the label, for instance the Semax spray, and show identity by mass spectrometry and purity by HPLC.

Frequently Asked Questions

How do I store a peptide nasal spray once it arrives?

Put it straight into a fridge at 2 to 8 °C, still boxed and shielded from light, and finish it before the expiry on the label. Peptides hold up less well in solution than as freeze-dried powder, so a spray will not last as long as an unopened vial. For stock meant to last months, the matching vial is the smarter buy.

Which peptide nasal spray suits my research best?

That depends on what you are modelling. Semax and Selank are the standard picks for cognition and stress studies, because Russia developed and registered both for intranasal use, giving them the longest record by that route. Sleep work suits DSIP, and melanocortin receptor studies suit Melanotan II or PT-141. All five bottles hold 10 mg in 10 mL.

What compounds come as a nasal spray at AminoLab?

There are five. Each bottle holds 10 mg dissolved at 1 mg per mL, and its lot code opens a matching certificate in the COA library.

Should I choose a peptide nasal spray over a vial?

Only if your design needs the intranasal route. A spray is ready to go at a fixed 1 mg per mL, yet any solution has a shorter life than freeze-dried powder. Stored at minus 20 °C, a lyophilised vial keeps longer and lets you set the concentration with bacteriostatic water, so for most protocols it is the better purchase.

Can I order a peptide nasal spray online in Australia?

Yes. All five sprays, Selank, Semax, DSIP, Melanotan II and PT-141, ship from Australian stock. Pick a single bottle or the three-bottle kit and check out.

Certificate of analysisEvery research peptide comes with the certificate for its lot, listed in the COA library.
Tested identity and purityIdentity confirmed by mass spectrometry and purity measured by HPLC on every batch.
Australian stockOrders pack and ship from Australia with tracked Australia Post delivery. See delivery information.
Adults 18+ onlySold for laboratory research use only, under our research use policy.

Research use onlyAminoLab supplies research compounds for laboratory and in-vitro use, not for human or animal consumption. By continuing you confirm you are 18 or older and buying for research.

Leave