Research peptides held in Australian stock, every lot tested by HPLC and mass spectrometry. For laboratory research use only.
Cart 0

MOTS-C Dosage Calculator: 10mg and 40mg Vials

MOTS-C Reconstitution Calculator

Concentration
Amount in 0.1 mL
Volume containing the target amount

Same volume on a U-100 syringe scale

The AminoLab MOTS-C dosage calculator turns a MOTS-C vial and a chosen volume of diluent into a working concentration, then expresses any amount you enter in millilitres and in U-100 syringe units. It opens on the AminoLab MOTS-C 10mg vial by default, and you can change the fill to 40mg or type in custom figures at any time.

Mixing a MOTS-C Vial With Bac Water

Add 2 mL of bacteriostatic water to the MOTS-C 10mg vial and every millilitre holds 5 mg. Put the same 2 mL into the 40mg fill and the solution is four times stronger at 20 mg per mL, or roughly 13.3 mg per mL if you use 3 mL, which means any given amount needs only one quarter of the units. The bigger fill makes sense when the whole reconstituted vial will be finished within roughly 28 days in a fridge held at 2 to 8 °C.

Concentration Table for Each MOTS-C Fill

The rows below pair each vial size with each water volume. As a reference point, 10 units on a U-100 insulin syringe equals 0.1 mL, and the full 100 units equals 1 mL.

MOTS-C fillWater volumeStrengthIn 10 units (0.1 mL)In 1 unit
10 mg1 mL10 mg per mL1000 mcg (1 mg)100 mcg
10 mg2 mL5 mg per mL500 mcg (0.5 mg)50 mcg
10 mg3 mL3.333 mg per mL333.333 mcg (0.333 mg)33.333 mcg
40 mg1 mL40 mg per mL4000 mcg (4 mg)400 mcg
40 mg2 mL20 mg per mL2000 mcg (2 mg)200 mcg
40 mg3 mL13.333 mg per mL1333.333 mcg (1.333 mg)133.333 mcg

How the MOTS-C Dosage Calculator Works the Numbers Out

Strength in mg per mL equals the milligrams of MOTS-C in the vial ÷ the millilitres of water you put in.

Syringe units (U-100) equal the amount you want in mg ÷ that strength in mg per mL, × 100.

Any figure entered in micrograms is first converted by dividing it by 1,000. The tool simply performs the maths and never suggests what amount to use. AminoLab sells MOTS-C strictly for laboratory research use only.

Shop MOTS-c Online, 10mg, 20mg or 40mg

Once the examples have helped you settle on a fill, place your order. AminoLab lists MOTS-c as 10mg, 20mg and 40mg vials, and the larger fill works out cheaper per milligram across a long project. Add bac water to the same cart, or look at SS-31 when the work calls for a compound aimed at the mitochondrial membrane. Anyone hunting for MOTS-c near me can buy from the same Australian stock through the online shop.

MOTS-C Calculator Explained

Reading the MOTS-C Results

Every line the MOTS-C dosage calculator prints follows from one division. The concentration figure is simply the milligrams of MOTS-C in the vial divided by the volume of bacteriostatic water you added. Multiply that by 100 and you get the mcg per 0.1 mL line, a fast sanity check on what ten graduations contain. The volume line divides your target by the concentration, and the units line takes that volume and multiplies it by 100 to suit a U-100 syringe.

Worked Example, 1 mg of MOTS-C From Each Fill

  • 10mg fill gives 10, 5 or 3.333 mg/mL with 1, 2 or 3 mL, equal to 1,000, 500 or roughly 333 mcg per 0.1 mL. A 1 mg amount needs 0.1 mL (10 units) at 1 mL, 0.2 mL (20 units) at 2 mL and 0.3 mL (30 units) at 3 mL.
  • 20mg fill gives 20, 10 or 6.667 mg/mL, equal to 2,000, 1,000 or roughly 667 mcg per 0.1 mL. A 1 mg amount needs 0.05 mL (5 units), 0.1 mL (10 units) or 0.15 mL (15 units).
  • 40mg fill gives 40, 20 or 13.333 mg/mL, equal to 4,000, 2,000 or roughly 1,333 mcg per 0.1 mL. A 1 mg amount needs 0.025 mL (2.5 units), 0.05 mL (5 units) or 0.075 mL (7.5 units).

Picking a Water Volume for Your MOTS-C Fill

All three volumes read easily on the 10mg vial, because a 1 mg aliquot lands somewhere between 10 and 30 units. The 40mg fill is harder to handle. Even with 3 mL added, 1 mg is only 7.5 units, and with 1 mL it drops to 2.5 units, which sits between marks. When you need small amounts from the 40mg vial, add the full 3 mL or make up a second working dilution. Keep in mind the MOTS-C vial sizes share the same vial capacity and differ only in how much peptide is inside.

MOTS-C Molarity at 2,174.6 g/mol

MOTS-C is a 16 residue peptide of mitochondrial origin with a molar mass close to 2,174.6 g/mol, which makes a 5 mg/mL stock, the 10mg vial in 2 mL, roughly 2.3 mM, and a single micromolar works out near 2.17 mcg per mL. Check the mass listed for your specific lot in the certificate library before you convert any cell culture concentrations.

Common MOTS-C Input Mistakes

  • Running numbers on the 10mg default when the vial on the bench is actually the 40mg, so every volume comes out four times too high.
  • Typing a 1 mg target into the mcg field, which leaves the result at a tiny fraction of a unit.
  • Writing 20 units of MOTS-C solution into the lab book as 2 mL when the true volume is 0.2 mL.
  • Putting in the vial's 3 mL capacity instead of the volume of water you really added.

MOTS-C Calculator Questions

What volume of bac water suits a 10mg MOTS-C vial?

Anywhere from 1 to 3 mL works. With 2 mL the strength is 5 mg per mL, which puts 0.5 mg in 10 units on a U-100 syringe. Dropping to 1 mL doubles the strength and halves the volume needed.

What volume of bac water suits a 40mg MOTS-C vial?

A standard vial takes roughly 3 mL at most, and that volume yields around 13.3 mg per mL. Each single unit on a U-100 syringe then carries close to 0.13 mg.

How long is mixed MOTS-C good for?

Refrigerate it at 2 to 8 °C and finish it within about 28 days of reconstitution. Dry, lyophilized MOTS-C lasts far longer in the freezer, and our peptide storage guide covers the details.

Other Peptide Calculators

Buy MOTS-C

MOTS-C

10 mg vial, 20 mg vial, 40 mg vial

From $69

Bacteriostatic Water

3 mL, 3 mL + 1 syringe, 10 mL, 10 mL + 1 syringe, 30 mL, 30 mL + 1 syringe

From $9
Certificate of analysisEvery research peptide comes with the certificate for its lot, listed in the COA library.
Tested identity and purityIdentity confirmed by mass spectrometry and purity measured by HPLC on every batch.
Australian stockOrders pack and ship from Australia with tracked Australia Post delivery. See delivery information.
Adults 18+ onlySold for laboratory research use only, under our research use policy.

Research use onlyAminoLab supplies research compounds for laboratory and in-vitro use, not for human or animal consumption. By continuing you confirm you are 18 or older and buying for research.

Leave