Research peptides held in Australian stock, every lot tested by HPLC and mass spectrometry. For laboratory research use only.
Cart 0

Tesamorelin Dosage Calculator: Concentration and Units

Tesamorelin Reconstitution Calculator

Concentration
Amount in 0.1 mL
Volume containing the target amount

Same volume on a U-100 syringe scale

This tesamorelin dosage calculator is built for bench maths. Type in the fill, the water volume and a target, and it turns any tesamorelin figure into millilitres and U-100 insulin syringe units. It opens on our 10mg tesamorelin vial by default, and it handles the 16mg tesamorelin and ipamorelin blend as well.

Mixing Tesamorelin for the Bench

Add 2 mL of bacteriostatic water to a tesamorelin 10mg vial and the strength comes out at 5 mg per mL, which puts 0.5 mg at the 10 unit line of a U-100 syringe. Tesamorelin work is normally planned in milligrams, so the draws run bigger than with microgram compounds like ipamorelin. Keep an eye on the result and make sure it stays below 100 units if you are using a 1 mL syringe.

Working with the tesamorelin and ipamorelin blend? Type in the whole 16mg fill. Out of every 16 parts, 13 are tesamorelin and 3 are ipamorelin.

Tesamorelin Dilution Table

Each row shows the strength for a given fill and water volume. As a reminder, 10 units on a U-100 insulin syringe is 0.1 mL, and the full 100 units is 1 mL.

Vial sizeWater addedResulting strengthIn 1 unitIn 10 units (0.1 mL)
10 mg1 mL10 mg/mL100 mcg1000 mcg (1 mg)
10 mg2 mL5 mg/mL50 mcg500 mcg (0.5 mg)
10 mg3 mL3.333 mg/mL33.333 mcg333.333 mcg (0.333 mg)

The Maths the Tesamorelin Dosage Calculator Runs

strength in mg/mL = mg of tesamorelin in the vial ÷ mL of water put in

Marks on a U-100 barrel = target in mg ÷ strength in mg/mL × 100

A microgram target is first divided by 1,000. Beyond that arithmetic the tool does nothing, and it never suggests an amount. All tesamorelin sold by AminoLab is for laboratory research use only and is supplied to adults 18+.

Buy Tesamorelin Online in 5, 10 or 20mg Fills

Settle on a fill using the worked examples, then order the tesamorelin vial online. Most labs begin with the 10mg, while the tesamorelin and ipamorelin blend fits studies that call for both compounds. Add bac water to the same cart and it ships together. If you were hoping to find tesamorelin near me, every lot certificate can be read online before you buy, wherever you are in Australia.

Tesamorelin Calculator Explained

What the Tesamorelin Results Mean

The strength figure is the fill, whether 5, 10 or 20mg, split across the water you added. Multiply strength by 100 to get the mcg in 0.1 mL. For the volume line, your milligram target is divided by the strength, and the units line then scales that volume up by 100 so it lines up with the marks on a U-100 syringe.

Reaching 1 mg of Tesamorelin From Each Fill

  • 5mg with 1, 2 or 3 mL gives 5, 2.5 or 1.667 mg/mL, which is 500, 250 or roughly 167 mcg per 0.1 mL, so 1 mg needs 0.2, 0.4 or 0.6 mL, equal to 20, 40 or 60 units.
  • 10mg gives 10, 5 or 3.333 mg/mL, which is 1,000, 500 or roughly 333 mcg per 0.1 mL, so 1 mg needs 0.1, 0.2 or 0.3 mL, equal to 10, 20 or 30 units.
  • 20mg gives 20, 10 or 6.667 mg/mL, which is 2,000, 1,000 or roughly 667 mcg per 0.1 mL, so 1 mg needs 0.05, 0.1 or 0.15 mL, equal to 5, 10 or 15 units.

Picking a Water Volume That Reads Well

With milligram targets the norm for tesamorelin, a 5mg vial made up with 3 mL already calls for 60 units to reach 1 mg, and a 2 mg target would run past 100 units. At the other extreme, the 20mg fill in 1 mL puts 1 mg at just 5 units. Mixing the tesamorelin 10mg or 20mg vial with 2 mL keeps everyday targets somewhere from 10 to 40 units, the clearest part of a 1 mL barrel to read.

Splitting the 16mg Blend Into Its Two Peptides

Inside the tesamorelin and ipamorelin blend are 13mg and 3mg respectively. Put in 16mg as the fill, then take 13/16 of the combined strength for tesamorelin and 3/16 for ipamorelin. With 2 mL of water the vial comes to 8 mg/mL overall, made up of 6.5 mg/mL tesamorelin and 1.5 mg/mL ipamorelin.

Why Tesamorelin's Size Changes Molar Maths

Tesamorelin weighs in at about 5,136 g/mol, so even a 5 mg/mL stock sits below 1 mM, and each micromolar takes around 5.14 mcg per mL. Inside the blend, the 3mg of ipamorelin, at roughly 712 g/mol, comes to about 4.2 micromoles, compared with 2.5 micromoles of tesamorelin. In other words, the peptide with the smaller share by mass supplies more molecules.

Tesamorelin Input Errors to Avoid

  • Putting 13mg in the fill box for the blend when the whole vial is 16mg.
  • Entering a 1 mg target as 1 mcg, so that at 10 mg/mL the answer is one hundredth of a unit.
  • Mistaking 40 units for 4 mL when it is actually 0.4 mL.

Tesamorelin Calculator Questions

What water volume works for a 10mg tesamorelin vial?

Anywhere between 1 and 3 mL. With 2 mL the strength is 5 mg per mL, while 1 mL gives 10 mg per mL and smaller draws. Whatever volume you choose, the calculator returns the units for your amount.

How is the tesamorelin and ipamorelin blend worked out?

Use 16mg as the vial amount. You get one combined strength, and of any volume you draw, 13/16 is tesamorelin and 3/16 is ipamorelin.

Is bacteriostatic water or sterile water better for tesamorelin?

Most labs pick bacteriostatic water when a vial will be accessed several times. It contains benzyl alcohol as a preservative, which holds back bacterial growth once the stopper has been pierced.

Other Peptide Calculators

Buy Tesamorelin

Tesamorelin

5 mg vial, 10 mg vial, 20 mg vial

From $89.99

Bacteriostatic Water

3 mL, 3 mL + 1 syringe, 10 mL, 10 mL + 1 syringe, 30 mL, 30 mL + 1 syringe

From $9
Certificate of analysisEvery research peptide comes with the certificate for its lot, listed in the COA library.
Tested identity and purityIdentity confirmed by mass spectrometry and purity measured by HPLC on every batch.
Australian stockOrders pack and ship from Australia with tracked Australia Post delivery. See delivery information.
Adults 18+ onlySold for laboratory research use only, under our research use policy.

Research use onlyAminoLab supplies research compounds for laboratory and in-vitro use, not for human or animal consumption. By continuing you confirm you are 18 or older and buying for research.

Leave